Patents

Vertical A: C-MET

  1. A PROCESS FOR THE PREPARATION OF A COPPER-POLYMER COMPOSITE FOR 3D PRINTING, Manish Shinde, Chitradeep Jash, Dhananjay Mali, Govind Umarji, Sunit Rane, Sankha Dip Das, Indian Patent Application No. 202411052985 date 11.7.2024.
  2. COMPOSITE AND A PROCESS FOR ITS PREPARATION, Sunit Rane, Manish Shinde, Chitradeep Jash, Naveenraj Rajaram, Sankha Dip Das, Indian Patent Application No. 202311002881 Date: 13/01/2023.

Vertical B: C-MET

  1. A Photocurable composite and a process of its preparation, Late Girish J Phatak, Vijaya D Giramkar, Shany Joseph, Sankha Dip Das, Jesly Joseph, Jyoti R Kondhalkar, Pankaj K Jagdale, Ranjit R Hawaldar, Ranjit V Kashid, Janardhan Rao Gade, Bharat B Kale, Indian Patent filed (2023) Application no: 202311055665 dated 19.08.2023
  2. Multimaterial printing process with multilayered features for LTCC packages using digital light projection based 3D printer, Late Girish Phatak, Vijaya Giramkar, Shany Joseph, Sankha Dip Das, Pankaj Jagdale, Swapnil Doke, Jesly Joseph, Jyoti Kondhalkar, Bharat Kale, Indian Patent filed (2024) Application no: 202411050959 dated 03.07.2024

Publication in journals

Vertical A: C-MET

  1. Solution chemistry-assisted preparation of ZnO NPs–PLA nanocomposites and their filaments for fused filament fabrication 3D printing process, Chitradeep Jash, Priyanka N. Birla, R. Naveenraj, Manish D. Shinde, Kishor B. Waghulde & Sunit B. Rane, Progress in Additive Manufacturing, 2024, 1-14 [DOI: https://doi.org/10.1007/s40964-024-00764-0] (Electronic ISSN 2363-9520, Print ISSN 2363-9512).
  2. Preparation of phase pure MgTiO3 microwave dielectric ceramic for GPS antenna application, Dhananjay Mali, Naveenraj R, Ruchita Vehale, Manish D. Shinde, Govind G. Umarji and Sunit Rane, Journal of Materials Chemistry C, 2024 [DOI: 10.1039/D4TC02724H] (Online ISSN: 2050-7534).

Vertical A: CIPET

  1. Ajaykumar PV, Nidhin Divakaran, Alex Y, Agneyarka Mohapatra, Smita Mohanty, Fabrication of Material Extrusion-Based Carbon Nanotubes/Zinc Oxide Core–Shell Polylactic Acid Nanocomposite Filaments for Advanced Biomedical Applications, Wiley Advanced Engineering Materials, 2023 (Impact Factor: 4.122).
  2. Jyothi Prakash Das, Nidhin Divakaran*, Alex Y, Manoj T P, Smitha Mohanty: Fabrication of 3D printing extrusion-based Nylon 12/Bi2O3 composite filaments for thermal interface device application, Elsevier Journal of Manufacturing Process 2022 (Impact factor: 5.684).
  3. Agneyarka Mohapatra, Nidhin Divakaran*, Alex Y, Ajay Kumar P V, Smitha Mohanty; Significant role of CNT-ZnO core shell nanostructures in development of FDM based 3D printed triboelectric nanogenerators, Materials Today Nano, Elsevier [2023] (Impact factor: 13.364) .
  4. Nidhin Divakaran*, Ajay Kumar, P.V., Mohapatra, A., Alex, Y. and Mohanty, S. (2023), Significant role of carbon nanomaterials in material extrusion-based 3D printed Triboelectric nanogenerators. Wiley Energy Technology, 2022. (Impact Factor: 4.149).
  5. Nidhin Divakaran*, Jyothi Prakash Das, Ajay Kumar P V, Smitha Mohanty, Ananthakumar Ramadoss, Sanjay Kumar Nayak; Comprehensive review on various additive manufacturing techniques and its implementation in electronic devices; Journal of manufacturing systems, Volume 62, Pages 477-502, [2022] (Impact factor: 9.498)

Vertical B: C-MET

Influence of Photo-initiator concentration on photo-activation of composites prepared with LTCC and silver powders for DLP based 3D printing and their characterization, IOP Conference Series: Materials Science and Engineering. 1248 (2022) 012095, Doi: 10.1088/1757-899X/1248/1/012095 (ISSN:1757-899X).

Publications in conferences

Vertical A: C-MET

  1. 3D-Printed Lithium-ion Batteries Fabricated using Direct Ink Writing (DIW), Shubhangi Supekar, Manish Shinde, Govind Umarji, Ram Kalubarme, Sunit Rane*, AFD/ICESMA – 2024 conference, during 8-10th March 2024, C-MET Hyderabad. (3rd Best Poster Paper Award).
  2. Design, Simulation and 3D printing of Polymer Patch Antenna for GPS applications, Ruchita Vehale, Chitradeep Jash, Dhananjay Mali, Snehal Saraf, Naveenraj R., Manish Shinde, Govind Umarji, Sunit Rane, AFD/ICESMA – 2024 conference, during 8-10th March 2024, C-MET Hyderabad.
  3. Polymer-Ceramic Composite Filaments for Fused Filament Fabrication 3D printing Technique, Dhananjay Mali, Naveenraj R, Chitradeep Jash, Manish D. Shinde, Govind Umarji, Sunit B. Rane, AFD/ICESMA – 2024 conference, during 8-10th March 2024, C-MET Hyderabad.
  4. Fabrication of ABS-ZnO NPs composite filament for fused filament fabrication 3D printing process, Chitradeep Jash, Dhananjay Mali, Priyanka N Birla, Naveenraj R, Manish D Shinde, Govind G Umarji, Kishor B Waghulde, Sunit B Rane, AFD/ICESMA – 2024 conference, during 8-10th March 2024, C-MET Hyderabad.
  5. Inkjet printed Lithium-ion flexible pouch cell for flexible electronics, Rohit Hanamsagar, Govind Umarji, Manish Shinde, Sudhir Arbuj, Milind Kulkarni, Sunit Rane, AFD/ICESMA – 2024 conference, during 8-10th March 2024, C-MET Hyderabad.
  6. 3D Printed Graphite Anode for LIBs: Effect of Printing on Electrochemical Performance, Shubhangi Supekar, Ruchita Vehale, Manish Shinde, R. S. Kalubarme, Sunit B. Rane, 6th International Conference on Nanomaterials for Energy and Environment [Nano-E2-2023], Kolhapur, Dec. 21-23, 2023 (Best Poster Paper Award).
  7. Semiconductor Binder Jet 3D Printing: an Effect of Additive on the Printed Part, Chitradeep Jash, Naveenraj R, Dhananjay Mali Manish D. Shinde, Govind Umarji, Sunit B. Rane, 12th International Conference, 3D Printing & Additive Manufacturing Technologies – AM 2023 13 – 15th September 2023, Bengaluru, India.
  8. Binder Jet 3D Printing of Alumina and study of dielectric properties, Dhananjay Mali, Naveenraj R, Chitradeep Jash, Manish D. Shinde, Govind Umarji, Narendra R. Deore, Sunit B. Rane, 12th International Conference, 3D Printing & Additive Manufacturing Technologies – AM 2023 13 – 15th September 2023, Bengaluru, India.
  9. ZnO NPs -PLA nanocomposite filaments for fused filament fabrication 3D printing process, Chitradeep Jash, Priyanka N Birla, Naveen R, Manish D Shinde, Kishor B Waghulde, Sunit B Rane, International Conference on Convergence in Technology, DY Patil College of Engineering, Pimpari, 8-9 Sept. 2023 (Best paper Award).
  10. Fabrication of PLA-Cu Composite Filament for Fused Deposition Modeling 3D Printing Process, Chitradeep Jash, Dhananjay Mali, Naveenraj R, Deepak Jatav, Manish D. Shinde, Govind Umarji, Sudhir Arbuj, Sunit B. Rane, International Materials Conclave (IMC-2023) Pune, March 8-10, 2023.
  11. Preparation of Conductive Graphite-PLA Composite Filaments for Fused Filament Fabrication (FFF), Deepak Jatav, Chitradeep Jash, Dhananjay Mali, Naveenraj R, Govind Umarji, Shubhangi Damkale, Manish D. Shinde, Sunit B. Rane, International Materials Conclave (IMC-2023) Pune, March 8-10, 2023.
  12. 3D Printable Polymer-Ceramic Composite Filaments for Fused Filament Fabrication Technique, Dhananjay Mali, Naveenraj R, Chitradeep Jash, Deepak Jatav, Manish D. Shinde, Govind Umarji, Sudhir Arbuj, Sunit B. Rane, International Materials Conclave (IMC-2023) Pune, March 8-10, 2023.
  13. Preparation of Magnesium Titanate Ceramics by Co-Precipitation Method and Their Sintering Behavior Study Naveenraj R, Dhananjay Mali, Chitradeep Jash, Govind Umarji, Sudhir Arbuj, Manish Shinde, Sunit Rane, International Materials Conclave (IMC-2023) Pune, March 8-10, 2023.
  14. Anionic-cationic co-doping for enhanced ionic conductivity of LLZO solid electrolyte, Srushti Kulkarni, Prashant Misal, Manish Shinde, Sudhir Arbuj, Milind Kulkarni, Sunit Rane,
    International Materials Conclave (IMC-2023) Pune, March 8-10, 2023.
  15. Synthesis and Characterization of ZnAl2O4 Ceramics by Sol-gel and Solid-State route and its Gas Sensing Properties, R Naveenraj, Dhananjay Mali, Manish D Shinde, Sudhir S Arbuj, Govind G Umarji, Sunit B Rane, World Sensor Congress (WSC-2022), March 8-10, 2022, Trissur, India.
  16. Preparation and Characterization of MgTiO3 Powders and their Humidity Sensing Performance, Dhananjay Mali, R Naveenraj, Manish Shinde, Sudhir Arbuj, Govind Umarji, Sunit Rane, World Sensor Congress (WSC-2022), March 8-10, 2022, Thrissur, India.
  17. Fused Filament Fabrication of ZnO-LDPE composite Matrilas for 3D printed sensor applications, Chitradeep Jash, Dhananjay Mali, R Naveenraj, Manish Shinde, Sudhir Arbuj, Govind Umarji, Sunit Rane, World Sensor Congress (WSC-2022), March 8-10, 2022, Thrissur, India.

Vertical A: CIPET

  1. Fabrication of extrusion-based 3D printed triboelectric nanogenerators (TENG), Advancements in Polymeric Materials (APM-2021), CIPET, Chennai, March (8-12), 2022.
  2. Fabrication of Alumina Reinforced Nylon-12 composites for 3D printing of Electronics Devices, Advancements in Polymeric Materials (APM-2021), CIPET: SARP-LARPM, Bhubaneswar, March (9-13), 2021.
  3. Bismuth Oxide Reinforced Nylon-12 Composite Filament for 3D Printing of Multifunctional Semiconducting Devices, International Online Conference on Nano Materials (ICN -2021), MG University, Kerala, April (9-11), 2021.
  4. Fabrication and Characterization of Nylon 12-Graphite Composite: A Novel Step towards 3D Printing of Functional Device, Frontiers in Materials for Technological Applications (FIMTA-2021), CSIR-IMMT, Bhubaneswar, 04-06 August 2021.

Vertical B: C-MET

  1. Influence of photo-initiator concentration on photo-activation of composites prepared with LTCC and Ag for DLP based 3D printing and their characterization in ICMSE 2022 at NIT, Jalandhar, INDIA.
  2. Digital Light Processing Based Additive Manufacturing Technology For Optoelectronic Packages in Digital India Week 2022 (DIW 2022) at Gandhinagar, Gujarat, INDIA.
  3. Micro-fabrication of 3D printed LTCC electronic devices by DLP based additive manufacturing in 3D AM Aero 2022 at Ramaiah Institute of Technology, Bangalore, INDIA.
  4. Influence of process parameters and selection of sacrificial materials for LTCC based packages based on DLP 3D printing in 3D AM Aero 2022 at Ramaiah Institute of Technology, Bangalore, INDIA.
  5. Digital Light Projection Based 3D Printing for Low Cost Electronic Packaging Application in International Materials Conclave (IMC)-2023 at CMET, Pune, INDIA.
  6. 3D printing of conducting tracks for microfabrication of LTCC based electronic devices using Digital Light Projection technology, presented at 12th International Conference of 3D Printing and Additive Manufacturing Technologies-AM 2023, 13-15th September 2023 at Bangalore International Exhibition Centre (BIEC), Bengaluru, INDIA.
  7. Cera4s 2024, IIT Chennai (28-30 Nov. 2024).
  8. PAMFP 2024, IIT Hyderabad (11-13 Dec. 2024).

Awards

Vertical A: C-MET

  1. 3D-Printed Lithium-ion Batteries Fabricated using Direct Ink Writing (DIW), Shubhangi Supekar, Manish Shinde, Govind Umarji, Ram Kalubarme, Sunit Rane*. ICESMA – 2024 Conference, during 8th -10th March 2024 at C-MET Hyderabad. (3rd Best Poster award).
  2. 3D-Printed graphite anode for Lithium-ion Batteries: Effect of printing on electrochemical performance, Shubhangi Supekar, Ruchita Vehale, Manish Shinde, Ram Kalubarme, Sunit Rane*. 6th International Conference on Nanomaterials for Energy and Environment (Nano-E2), during 22nd -23rd December 2023 at the New College, Kolhapur, India. (Best Poster award).
  3. Preparation of ZnO NPs – PLA nanocomposite filaments for fused filament fabrication 3D printing process, Chitradeep Jash, Priyanka Birla, Naveenraj R, Manish D. Shinde, Kishor Waghulde, Sunit B. Rane, 1st International Conference on Convergence in Technology (ICCT) 2023, at Department of Mechanical Engineering, Department of Automation & Robotics Engineering and Department of Electronics and Telecommunication Engineering of Dr. D. Y. Patil Institute of Technology, Pimpri, Pune, during 8-9th Sept 2023. (Best Paper Presentation award).

Vertical B: C-MET

Micro-fabrication of 3D printed LTCC electronic devices by DLP based additive manufacturing in 3D AM Aero 2022 at Ramaiah Institute of Technology, Bangalore (BEST POSTER AWARD).

Invited Lectures

Vertical A: C-MET

  1. Manish Shinde delivered an Invited Talk “Additive Manufacturing Technology, Process and Applications” in a workshop titled “Wearable and Flexible Antennas for Defence and Medical Applications” from June 28, 2023, to July 06, 2023, under the KARYASHALA Scheme – A SERB initiative at Department of Electronics Engineering at DIAT Pune on 01-07-2023.
  2. Manish Shinde delivered Lecture “Additive Manufacturing” at Work Based Learning (WBL) Orientation Workshop organized at C-MET, Pune on 14-10-2022.
  3. Manish Shinde delivered an Invited Talk “3D printing Technology and its Applications” at Loknete Vinayakrao Hiray Arts, Science and Commerce College, Panchwati, Nashik in online mode on 19-08-2022.
  4. Manish Shinde delivered an Invited Talk “Material development And fine tuning for 3D printing of antennas” at Modern College, Pune on 23-11-2024.

Vertical B: C-MET

Dr. Swapnil Doke delivered Lecture “DLP based 3D printing technology” at Work Based Learning (WBL) Orientation Workshop organized at C-MET, Pune on 14-10-2022.

Scroll to Top
Skip to content